What’s That White Stuff Everywhere?
Do you see white residue on your faucets, shower heads, and just about any surface your water touches? We’re here to tell you: it’s not harmful to your health, it may be bad news for your appliances, and there are easy fixes.
You’re not alone if you sat down to search for an explanation to the white spots, film, and build-up which seems to be plaguing your glassware, faucets, shower heads, shower glass, and beyond. This nuisance deposit from drinking water is pervasive across the US (see the map below), but there are ways to get rid of it–so let’s get to the explaining.
USGS Map showing water hardness results from well testing across the US by National Water Quality Association Program in 2014.
What is this white, chalky, spotty build up?
The white stuff you see is the result of minerals carried through your tap water.
Higher amounts of mineral deposits usually signify higher levels of water hardness. Hardness refers to the total amount of calcium, magnesium, and occasionally other minerals (e.g. silicate) in your drinking water. As water flows through limestone and chalk in the environment, it dissolves calcium, carbonates, and magnesium that comprise the bulk of water hardness.
In areas with hard water, these minerals precipitate out of your tap water onto surfaces–which is why they’re found most commonly on your faucets, shower heads, pots and pans, and anything that comes out of the dishwasher. You might hear this chalky white substance called “limescale”, or “calcium buildup."
Is limescale bad for my health?
Water hardness is largely believed to be harmless to human health. In fact, some research suggests that exposure to calcium and magnesium may have protective effects against cardiovascular disease, though evidence is still not definitive. If water hardness causes any issues, it is usually aesthetic–e.g. taste or staining on clothing–or plumbing and appliance related.
Is limescale bad for my home?
If your water has high water hardness, scale can build up in your pipes–causing pressure and pipe integrity problems over time. This can negatively influence the water pipes to your home, but also the smaller pipes attached to appliances like washing machines, dishwashers, water heaters, and even your freezer’s ice maker. You’ve likely noticed a lot of limescale around your home if this is the case, but testing your water for hardness can give you a clear indication of whether you need to invest in a treatment solution.
How do I get rid of limescale?
Fortunately there are some great natural remedies to rid your sinks, showers, and pots of limescale. (Note: when limescale reacts with soap (think: shower and tub), it can form mineral deposits known as "soap scum"–this is white to off-white in color, and you should be able to remove it the way you remove limescale.)
Sinks & Faucet Heads
Soak a cloth or towel in vinegar. Wrap it around your tap and let soak for 30-60 minutes depending on how much build up you have. Remove, scrub, and wash with soap and water.
If you have build up in the toilet, a little vinegar and baking soda will go a long way:
- Turn off water to toilet and then flush so the water level is low and you can see deposits
- Spray or rub vinegar on deposits and let sit for 30-45 minutes
- Then, scrub deposits with a toilet brush; if this works, turn the water on and end here
- If you still see deposits, add baking soda and scrub
- This should do the trick, but a pumice stone scrub will take off any recalcitrant deposits.
This method wastes a bit of water, but if your washer is filled with deposits, you may need to run through this routine:
- Run a hot cycle (empty) with 1 cup of baking soda
- Clean the inside of the washer with a cloth
- Run a second hot cycle (empty) with 1 cup vinegar
Pots & Pans
For heavily scaled pots and pans:
- Fill pot with a 3:1 ratio of water to vinegar
- Bring to boil, then turn off and let sit until water is warm
- Use warm water with a sponge to scrub off the mineral deposits
- Wash regularly
While all of the above options are helpful to remediate what’s already been done, they do not eliminate water hardness in your water. This is not usually necessary, but sometimes tap water is too hard and will not taste good (e.g. usually over 180 milligrams per liter measured by calcium carbonate). If you need to reduce water hardness, your options are generally to:
- Invest in a water softener that uses salt-based ion exchange technology
- Invest in a water softener that uses non-salt-based technology
- Invest in a Reverse Osmosis treatment system (but you’ll need to maintain your RO often if your water hardness is high and this can be expensive.)
These tips should keep your home limescale-free. Check out our suite of water tests to find out which one makes sense for you if you’re facing severe water hardness and limescale issues. Anything we missed? Send a question our way: firstname.lastname@example.org.