Tips for Taps Blog
Everything You Need to Know About Water Hardness, Total Dissolved Solids, pH, and Alkalinity
There are many technical terms surrounding the general properties of your drinking water, but this shouldn’t stop you from knowing your water’s fundamental chemistry. Rather than leaving you to scratch your head (and search the internet for hours), we’ve assembled this handy guide to help you understand what some of the most important and fundamental water properties mean.
We think everyone who drinks water (i.e., everyone!) should know about these main water properties and why they matter.
We’ll take a look at the following water properties: hardness, total dissolved solids (TDS), pH, and alkalinity. Read on to find out why each is important, what they mean for your water quality and health, general ranges, and what to do about them.
Why Does Water Hardness Matter?
What Is Hard Water?
Water is typically categorized as “hard” if it contains high levels of dissolved and positively charged minerals like calcium and magnesium.
Water that lacks these hard minerals is called soft water.
You’ll most likely hear about hard water and a water softener in the same context. This is because a water softener is a treatment device or water conditioning system that removes hard minerals from water and usually replaces those minerals with something less problematic. Water that has been treated or conditioned by a water softener will taste differently than hard water, and leave less of a residue on fixtures.
Why Should I Care About Water Hardness?
Hard water is likely to leave mineral deposits on everything it touches. This means that hard water can cause many problems in a home or for a business. Hard water can:
Hardness is not inherently bad or dangerous, however. A small amount of water hardness is actually good for your tap water because hard elements like magnesium and calcium will naturally coat the inside surfaces of your pipes and protect them from corrosion (which will reduce the likelihood of metals leaching from plumbing into your drinking water).
Is It Safe To Drink Hard Water?
Often when we discuss water quality and health, we only think about the negative impacts. This time we’ve got some good news: Hard water can be beneficial. The National Research Council states that hard water generally contributes (between 5-20%) toward total calcium and magnesium dietary needs. While there is some evidence linking water hardness to other health conditions, it’s not yet been made fully clear what (if any) positive or negative health impacts there may be.
Water hardness above 400 PPM however, may very well be considered hard enough to merit treatment for the sake of avoiding potential health impact. Even though there is no fully agreed upon health concern yet endorsed by the scientific community, at a high enough level of hardness there may be good reason to consider eliminating treating the underlying causes.
Some water softeners work based on “ion exchange”, where calcium and magnesium (water hardness ions) are exchanged for sodium ions in your water.
It’s unlikely that the extra sodium in your water will cause a health problem, but if you have high blood pressure, you can avoid worrying about the added salt content by choosing “salt-free water softeners” (they tend to use potassium chloride ions).
What Level of Water Hardness Is Acceptable?
While there are different subjective interpretations of hard and soft water, here is a general guide for classifying your water’s hardness measurement.
In order to find an equivalent unit to measure all ions that make up water hardness, engineers measure hardness as parts per million (PPM) of calcium carbonate because it is easy to measure and one of the primary sources of water hardness.
You might see that water hardness is measured with varying units:
We know that all these units can get confusing, here are some useful ways to convert from one unit type to another:
1 Grain = 17.1 mg/L of CaCO3
1 mg/L of CaCO3 = 1 PPM of CaCO3
What Can I Do About Water Hardness?
If you want to avoid hard water for any reason, there are two main water softening options you can consider investing in:
*Note: You’ll need to maintain your RO often if your water hardness is high and this can be expensive.
As described above, you may even need to add some hardness to your water if your water is too soft. Doing so means adding minerals like calcium or magnesium back into your water with a special remineralization filter. Having some hardness in your water is good for your pipes because it can protect them from the corrosive effects of overly soft water.
It’s worth noting that because water hardness usually affects the entirety of a water system (pipes, faucets, showers, pumps, other equipment) that water softeners are generally only installed at the facility or whole-home level. You won’t often install a softener and just one tap, rather you’ll find that most products are designed for the full home or building. Such systems are called point-of-entry (as opposed to point-of-use).
Why Do Total Dissolved Solids (TDS) Matter?
What Is TDS in Water?
Due to its property as a universal solvent, water can dissolve a wide range of other substances. While these “dissolved solids" may refer to any substance that you can’t see in your water. The term total dissolved solids (TDS) typically refers to these dissolved inorganic salts:
Plus, small quantities of dissolved organic matter.
Ultimately, a measure of total dissolved solids (TDS) is considered to be the sum of all inorganic and organic substances in the water.
In the United States, elevated TDS in water is often attributed to natural environmental features–such as mineral springs, salt deposit, and seawater intrusions. However, other sources of TDS in drinking water may come from:
Why Should I Care About Total Dissolved Solids ?
High TDS concentrations in your water are likely to cause aesthetic issues rather than health issues. Due to these possible effects, TDS is only listed as a Secondary Drinking Water Standard by the EPA–which means that they are governed by a non-enforceable guideline (rather than a mandatory standard).
Elevated TDS levels may result in:
Low TDS levels may result in:
Is It Safe To Drink Water with High TDS?
While TDS does not have a direct effect on your health, and may only result in technical and aesthetic issues, extremely high TDS levels can indicate that potentially harmful contaminants (such a manganese, arsenic, or iron) are present in your water.
What Is the Acceptable TDS Level in Drinking Water?
What Can I Do About High TDS in My Tap Water?
The best way to lower TDS in your tap water is to invest in a reverse osmosis water filter. Most RO systems will remove at least 95% of the TDS in your water.
Why Does Water pH Matter?
What is pH?
pH is a measure of something’s acidity or basicity (sometimes referred to as alkalinity.) More specifically, pH measures the relative amount of free hydrogen and hydroxyl ions in the water. The pH scale ranges from 0 (acidic) to 14 (basic or alkaline). A pH of 7.0 is neutral. Water with more free hydrogen ions is acidic, while water with more free hydroxyl ions is basic.
Most tap water should fall in the range of 6 - 8.5. It’s important to note that the pH scale is logarithmic–meaning that each step on the scale corresponds to a ten-fold change in acidity. For example, water with a pH of four is ten times more acidic than water with a pH of five.
Why Care About the pH of Water?
Shifts in tap water pH can be caused by many different types of chemicals–making pH a crucial indicator of chemical changes and health of your drinking water.
Water with high pH may cause:
Water with low pH may cause:
Does the pH of Water Make a Health Difference?
pH will most often not directly affect your health. However, the U.S. EPA, classifies pH as a Secondary Drinking Water Standard and recommends a pH between 6.5 and 8.5 for drinking water. If your water pH is outside of these limits then there is a stronger likelihood for pipes and fixtures to corrode metals into your drinking water and there is also the chance that a nearby landfill may be leaking into your water supply.
Low pH levels (below 5) can have seriously harmful health effects on local wildlife like fish and pets.
You may have also seen mentions of high pH water (also known as “alkaline water”) and the touted health effects. This viral “health” trend has gained attention in recent years as one of the most popular “functional water” fads, but current scientific literature fails to back up these claims of superior health benefits of high pH water.
What Is the Ideal pH of Drinking Water?
Can I Change the pH of My Water?
If your tap water pH is too low (below 6) you may consider any one of several known treatment solutions in order to raise the pH of your drinking water.
- Installing a water softener to add alkali-rich compounds into your water
- Installing a neutralizing filter to raise your water to near pH 7
- Installing a sodium hydroxide injection feed pump
- Adding lemons or baking soda in your glass (temporary fix)
If your tap water pH is too high (above 8.5) and you taste a chalky bitterness in your water, then you may consider lowering your pH by installing an acid injection system.
Why Does the Alkalinity of My Water Matter?
What Is Alkalinity?
Alkalinity is a buffer for your water’s pH. This means it is a measure of your water’s ability to resist changes in pH level. Alkalinity “does this” by neutralizing weak acids that may enter your water on the way to your tap.
Alkalinity in tap water is normally expressed as the sum of concentrations of bicarbonate, carbonate, hydroxide, and some phosphates and silicates.
The alkalinity in your water usually originates from limestone-like deposits that dissolved into your water source (a well, an aquifer, etc.)
Why Care About Alkalinity?
Alkalinity mitigates changes to your water’s pH. This makes alkalinity important because swings in pH often lead to many other noticeable and un-noticeable changes in your overall water quality. Such changes may very well relate to your water’s health and maintenance concerns. In general, you don’t want your water pH swinging up and down or else your water quality and water health will be hard to predict.
While lower alkalinity waters can be more corrosive (i.e. low alkalinity allows weak acids enter the water supply they are more likely to lower the pH), higher alkalinity waters above 150 PPM are more likely to form scale (i.e. mineral deposits) on your pipes and other fixtures–making your plumbing system less effective.
Alkalinity is not detrimental to humans. In fact, alkalinity can often have a positive impact on your pipes and water distribution system.
When combined with hardness, moderately alkaline water (less than 300 PPM) can form a layer of calcium or magnesium carbonate that can inhibit or reduce corrosion of metal pipes. Note: most water distributors try to make your water slightly alkaline–striking a balance between coating the pipes with a safe level of calcium carbonate, but not so much so that pipes are damaged or your heater’s efficiency is affected.
Is Alkaline Water “Healthier”?
There is currently no health standard for alkalinity in drinking water.
While many bottled water companies have released alkaline water products in the past several years, the claims that alkaline water provides health benefits are largely unproven by the general science and health community. Alkaline water companies may claim that alkaline water slows aging, increases energy levels, helps with fertility, and helps you regulate your body’s pH level to prevent chronic diseases like cancer.
None of these claims have been proven.
What Is the Ideal Alkalinity of Drinking Water?
In general, you want your water’s alkalinity measurement to fall within 75% - 100% of your water’s hardness measurement (assuming both measured as calcium carbonate , ie. CaCO3 ) This is because, when reported in PPM (or mg/L) of calcium carbonate, alkalinity and hardness are nearly equal in concentration–as they generally come from the same minerals
Note: Do not confuse “alkaline water” (high pH water with more OH- ions than H+ ions), with water “alkalinity” (water’s ability to neutralize acid and keep pH stable.)
What Can I Do About My Water’s Alkalinity?
Since a broad range of alkalinity in drinking water is considered acceptable, it is not often that folks need to alter their natural water alkalinity. A low level of alkalinity is desirable in tap water because it serves as a buffer that prevents large swings in pH. If there is not enough alkalinity in your water (perhaps because a reverse osmosis treatment machine took it all out) then you may try the following approaches to raise your alkalinity (and pH):
- Add a remineralization filter to add minerals back into your water
- Install a water distiller which will remove acids in the water
- Install a water ionizer to separate acidic and basic water
What’s Your Water’s General Chemistry?
Each of the general properties of water explained above have various impacts on your water quality–whether a taste or odor effect, or something more insidious like increasing the likelihood of metals leaching into your water supply.
So, how do you know how your water measures up? The first step is to test your water. Using a certified laboratory to test your water will provide high-precision results that will ensure that your results are accurate and reliable.
Have more questions about water chemistry? Tap Score’s team of water quality engineers, treatment experts, and chemists are standing by to answer any questions you may have about your water. Send them a message any time: firstname.lastname@example.org.
Sources and References▾
Shop our most
I Have City Water
I Have Well Water