Quick Guide to Certified Water Filters for Lead

Figuring out which water filters are certified to reduce lead can be difficult. While “NSF” is in the name of the standards—NSF/ANSI—NSF is, in fact, only one of the organizations that are able to certify filters. There can also be discrepancies between old products, web claims, and certification databases. Moreover, simply being “NSF/WQA/IAPMO certified” isn’t always enough. Because lead is such a toxic drinking water contaminant, you want to be sure your treatment system is properly tested and verified to get the lead out.

We’ve done the legwork for you. This affiliate-free guide contains a comprehensive list of which filters are certified to NSF/ANSI standards for the reduction of lead, why that’s so important, and how to make sense of it all. These are not recommendations or endorsements, simply a listing, largely prompted by our curious customers.

Table of Contents:

• Understanding NSF/ANSI Standards and Why They Matter
• What Are the Relevant Standards for Lead Reduction?
• Water Filters Certified for Lead Reduction
• Which System Is Right for Me?
• How Do I Know if Lead Is In My Water?
• What’s the Takeaway?

What Are NSF/ANSI Standards and Why Do They Matter?

One of the many functions of the NSF (National Sanitation Foundation, not to be confused with the National Science Foundation) is to develop standards for residential water treatment devices. These standards are designed to ensure that the treatment devices are composed of nontoxic materials and that they reliably and adequately remove specific contaminants. NSF works in tandem with the American National Standards Institute (ANSI) to develop these standards (referred to as NSF/ANSI standards).

Federal agencies that regulate drinking water (i.e., the EPA for tap water and FDA for bottled water) do not regulate treatment devices. Certification to NSF/ANSI standards helps to provide unbiased information to consumers about which products will be effective for their water treatment needs. Some of the most popular NSF/ANSI standards address:

• Materials safety
• Structural integrity
• Specific contaminant reduction claims

What If A Filter Is Not Certified?

Because certifications are voluntary (and can be quite costly), firms can choose to skip the process altogether and still make a product that works just fine. On the other hand, a company may choose to skip certification because their product doesn’t work as well as they claim.

How Long Does Certification Last?

Certification to NSF/ANSI standards is valid for one year. Once a filter has been certified, the verification process must be repeated annually to ensure consistency and compliance.

Is NSF the Only Organization that Can Certify Products to NSF/ANSI Standards?

No! NSF is one organization that can certify products to NSF/ANSI standards, but it’s not the only one. Two other organizations commonly certify products to these standards as well: WQA and IAPMO.

What’s the Difference Between NSF, WQA, and IAPMO?

NSF, WQA and IAPMO are three different organizations that have themselves been certified to grant certifications to water treatment devices.

• The Water Quality Association (WQA) conducts its own research, education, and product testing and certification. The WQA Gold Seal Certification is awarded to products that have undergone testing in WQA's lab and meet certain quality standards, including NSF/ANSI standards
  
  
• The International Association of Plumbing & Mechanical Officials (IAPMO) has a research and testing arm, called IAPMO R&T, that certifies drinking water treatment devices as well. Similar to WQA, IAPMO R&T conducts testing in their own labs, confers certification to NSF/ANSI standards, and has their own seal that indicates the devices were certified by an accredited organization.

The idea here is that a product in question has undergone a thorough evaluation by a third party that specializes in testing and certification. Therefore, NSF, WQA, and IAPMO certifications are all of equal stature and any of their badges are intended to offer the consumer greater confidence when making a selection.

Which NSF/ANSI Standards Are Relevant for Lead Reduction in Drinking Water?

Each NSF/ANSI standard addresses a specific group of contaminants and can be conferred on an individual contaminant-basis, meaning that a product may be certified for reduction of one contaminant under a particular standard but not ALL contaminants that standard covers. NSF/ANSI standards 53 and 58 can both be used to certify products for the reduction of lead, among a select group of other compounds.

NSF/ANSI 53
Certifies water treatment products for the reduction of contaminants that could cause adverse health effects, e.g. lead, chromium, VOCs, and more. A chosen product must be certified to this standard for each contaminant individually. For example, a product can be certified to NSF/ANSI standard 53 for arsenic, but not for lead.

NSF/ANSI 58
Sets minimum requirements for point-of-use (POU) reverse osmosis (RO) systems in particular. Again, this standard covers contaminants such as lead, arsenic, VOCs, and more, but sets specific requirements the system needs to meet for each contaminant.

Does NSF/ANSI/CA 372 Apply to Lead Reduction?

This standard does not pertain to the reduction of lead in water. Instead, it outlines the general requirements relating to the lead content of drinking water system components such as solders and fluxes, faucets, water filters, water meters, coating, valves, pipes, etc. Certification to this standard ensures that these components do not exceed a maximum weighted lead content requirement, it gives no other information about the functioning of the component.

Water Filters Certified for Lead Reduction

This is an incomplete list of products (including the brand, product name, SKU and certifying body) certified for the reduction of lead in drinking water.

Countertop and Faucet Filters Certified to NSF/ANSI 53 for Lead Reduction

• Brita Elite/Longlast+ 
  (OB06) NSF/WQA
  
  
• Brita Elite Advanced Water Filter 
  (FR200) WQA
  
  
• Brita Hub Filter
  (CT01) WQA
  
  
• PUR PLUS Lead-Reducing Pitcher Filter
  (PPF951K) WQA
  
  
• PUR Faucet Filter
  (RF3375) NSF/WQA
  
  
• ZeroWater 5-Stage Filter 
  (​​ZR-017) IAPMO
  
  
• Aquasana Clean Water Machine
  (AQ-CWM2-R) WQA
  
  
• Lifestraw Home Replacement Filte
  (‎LSH7SPC301) NSF
  
  
• Carbon Block Technology Counter-Top Connected to Sink Faucet Filter
  (System: MPADC /  Cartridge:CBTAD) NSF
  
  
• Multipure Aquadome Filter 
  (System: MPAD  /  Cartridge: CB6AD) NSF
  
  
• Pelican Water Systems Countertop Drinking System
  (PDF-RF) NSF

Note: Both filter cartridges and the units they fit into (pitchers, countertop systems, etc) are often referred to as “filters.” A filter cartridge is the unit that actually filters the water and may often fit into multiple models of pitchers and countertop systems.

Under-sink Systems Certified to NSF/ANSI 53 for Lead Reduction

Under-sink systems typically have multiple stages composed of different filters and/or other treatment technologies (like UV disinfection).

• Hydroviv Drinking Water System Replacement Cartridge 
  (14cZIP) NSF
  
  
• Doulton Biotect Ultra Replacement Cartridge
  (W9123050) NSF
  
  

Reverse Osmosis Systems Certified to NSF/ANSI 58 for Lead Reduction

This standard is specific to reverse osmosis systems and includes some additional tested parameters such as recovery rating and TDS reduction. Reverse osmosis filters can be certified to other standards instead, but other technologies may not be certified to NSF/ANSI 58.

Products below are listed with information as follows: (Model Number/Replacement Element SKU)

• AquaTru Carafe
  (System: AT100/ Cartridge: 10AT100RF01) IAPMO
  
  
• Brondell H2O+ Capella
  (System: RC250/ Cartridge: RF-50) WQA
  
  
• APEC Ultimate 5-Stage 90 GPD High Output RO Water Systems for Drinking Water
  (System: RO-90/ [Cartridges: 1-SED10; 23-CAB10; MEM-90; 5-TCR]) WQA
  
  

Is “Tested to” the Same as “Certified for”?

No. When a product claims that it has been “tested to NSF standards” without receiving any actual certification, that means the product was not tested to the standard by one of the certifying bodies (NSF, WQA or IAPMO) and perhaps that parts of the standards were not actually met.

We’ve gone into more detail parsing out the variations of certification claims on products in our Red Flags Guide to Trusting Water Filter Reviews.

Which System Is Right for Me?

That answer always depends on a combination of your preferences and the specifics of what’s actually in your water’s unique contaminant profile. There are many factors to consider when choosing a water treatment system. These include:

• Effectiveness against contaminants of concern
• Monthly operating costs
• Ease-of-use
• Filtration rate
• Replacement/maintenance requirements

Not everyone has lead in their water so you’ll want to test to find out. You’ll also learn if there’s anything else you should be aware of. If your water test shows you do have lead in your water, you might want to learn how treatment technologies differ from one another.

How Do I Know If I Have Lead in My Water?

Because lead cannot be seen, smelled, or tasted, the only way to find out for sure is to have your water tested by a certified laboratory. Test strips cannot be trusted to present an accurate—or adequate—picture of lead contamination.

Tap Score’s Advanced City Test kit tests for over 100 analytes—including lead and other heavy metals—as well as water chemistry parameters that are key to selecting the right treatment system:

Our Lead and Copper Water Test zeroes in on lead and copper for targeted testing:

Tap Score’s water quality reports also make unbiased treatment recommendations that are easy to understand.