Tips for Taps Blog

Haloacetic Acids (HAA5/HAA9) in Drinking Water

Quick Guide: Haloacetic Acids in Drinking Water Explained

 

Haloacetic acids (including HAA5/HAA9) are one of the unintended byproducts formed during chlorine disinfection of drinking water. After testing your water to properly identify haloacetic acids (and their concentrations), you can consider installing the right filtration systems to help keep your drinking water safe. 

Here's a helpful, affiliate-free filtration guide that can help you understand how and if you should filter your water for HAA5/HAA9.

What Are Haloacetic Acids (HAA5/HAA9)?

Haloacetic acids are a group of disinfection byproducts (DBPs) that are created when chlorine (and to a lesser extent, chloramine) reacts with naturally occurring organic matter found in water supplies during treatment. HAA5 is made up of the five haloacetic acid compounds that are regulated by the EPA:

  • Dichloroacetic acid
  • Trichloroacetic acid
  • Monochloroacetic acid
  • Monobromoacetic acid
  • Dibromoacetic acid 

Between 2018 and 2020, the EPA monitored public water systems for additional contaminants to update the Unregulated Contaminant Monitoring Rule (UCMR). Four additional haloacetic acids were included in monitoring for a total of nine (HAA9):

  • Bromochloroacetic acid
  • Bromodichloroacetic acid
  • Dibromochloroacetic acid
  • Tribromoacetic acid

While disinfection is important for controlling bacteria and other pathogens, long term exposure to haloacetic acids has been linked to harmful health effects.

understanding haloacetic acids in drinking water

Quick Guide: Understanding Chlorine and Chloramine in Drinking Water

Effects of Haloacetic Acids on the Body

The Environmental Protection Agency (EPA) states that drinking water containing total haloacetic acids (HAA5) above the regulatory limit (Maximum Contaminant Level, or MCL) of 0.06 PPM (parts per million) over many years may lead to health issues with the liver, kidneys, development, as well as an increased risk of cancer.[1]

HAA5 is only slightly absorbed through the skin and, unlike the other primary disinfection byproduct, trihalomethanes (THMs) (which are a group of volatile organic compounds, or VOCs), they do not vaporize into the air at bathing water temperature. Due to this, HAA5 is primarily a concern from water that is used for drinking and cooking.

In some human studies, exposure to DBPs, including HAA5, increased the incidence of bladder cancer. Based on animal data, the cancer risk for HAA5 is about 1 in 60,000 for every 10 years of consistent exposure at the current regulatory level.[2] Studies have also found that HAA5 exposure can lead to harmful effects on fetal growth and development during pregnancy.

Learn more about total trihalomethanes (TTHMS) in the Quick Guide to Trihalomethanes and HAA5/HAA9

How Do You Know Your Water Has HAA5?

Haloacetic acids cannot be seen, smelled, or tasted. However, chances are if you are a customer of a public water system (i.e., you get your water from a utility company), you have some DBPs in your water. Which DBPs are in your water will depend on the precise organic compounds in the source water, certain water chemistry parameters (e.g., pH, temperature), and the treatment plant’s methods.

Higher levels of these compounds are more likely to be found in water supplies sourced from surface waters—like rivers or reservoirs—than groundwater (e.g. aquifers) because of the increased presence of natural organic matter in lakes, rivers, and reservoirs.

Public water systems are required to notify their customers if haloacetic acids exceed the MCL of 0.06 PPM.

Having your water tested by a certified laboratory is the best way to learn the specifics about the HAA5/HAA9—and other DBPs—in your tap water.

How to Remove HAA5 from Your Drinking Water

If you’re concerned about the level of haloacetic acids in your drinking water, there are several options for filtering water at home. 

Does Reverse Osmosis Remove Haloacetic Acids?

Yes, reverse osmosis water systems have been shown to reduce HAA5/HAA9. While RO systems are very effective at removing a wide array of contaminants, they are typically expensive to install and use large volumes of water.

Do Activated Carbon Filters Remove Haloacetic Acids?

Yes, activated carbon filters have been shown to be effective at reducing HAA5/HAA9 levels in tap water.

Do Filter Pitchers Remove Haloacetic Acids?

Depending on the type of technology the pitcher uses (such as those with activated carbon filters), point-of-use filters, like Brita or PUR, can reduce HAA5/HAA9 in water. But effectiveness may vary. 

Do Ultraviolet (UV) Filters Remove Haloacetic Acids?

No, UV filters will not remove HAA5/HAA9. While UV filters may be used as an alternative to chlorine during central water treatment to avoid the creation of HAAs, it will not remove the haloacetic acids already in the water system.

Does Boiling Water Remove Haloacetic Acids?

No, boiling water will not reduce HAA5/HAA9. Boiling water can actually concentrate other contaminants in your water, and increases your risk of inhaling DBPs like trihalomethanes. 

Additionally, there is no NSF/ANSI certification that specifically tests for HAAs, so we cannot recommend a certification that would guarantee the product was performance tested for that class of compounds.

The Top 5 Most Popular Water Filtration Technologies

Talk to Tap Score

What’s the Takeaway?

Ultimately, the safest approach to avoid HAA5/HAA9 is for utilities to prevent their formation during water treatment by deploying corrective approaches to remove natural organic matter from water supplies before disinfecting with chlorine, rather than filtering at home. But that’s far easier said than done.

  • Haloacetic acids are a group of disinfection byproducts that are created when chlorine reacts with naturally occurring organic matter found in water supplies during treatment 
  • Five haloacetic acids (HAA5) are regulated by the EPA; the Maximum Contaminant Level for Total HAA5 is 0.06 PPM. Four additional haloacetic acid compounds were monitored under the UCMR (Unregulated Contaminant Monitoring Rule), for a total of nine (HAA9)—but they remain unregulated.
  • After testing your water for haloacetic levels, you can consider a variety of treatment options for your water. Activated carbon filters have proven effective at reducing HAA5 levels in tap water.
author portrait
About The Author

DIGITAL CONTENT EDITOR


Sasha Sosnowski is a writer and editor from Los Angeles, California. He studied journalism and history at the University of Warsaw and the University of Arts London and has demonstrated his skills through professional roles as a research assistant, proofreader, magazine editor, and essayist. In his spare time, Sasha enjoys working on his collection of vintage typewriters.
back to top