Tips for Taps Blog

Is my water filter working?

How Do I Know If My Water Filter Is Working?

 

On your water’s journey from its source to your home, it may be exposed to any number of contaminants. Residential water filtration products will claim to remove different parameters from your water, but how do you know they’re working?

While a sudden change in the taste, odor, or color of your water can indicate that your filter is failing, high levels of important contaminants, such as pathogens, arsenic, lead, and nitrates, are not observable to your senses. 

The only way to truly know whether or not your filter is working is to test your water. 

How Can I Test My Water Filter at Home?

The most effective way to determine if your water filter is working properly is to test your water before and after it passes through your filter. 

Such analysis is called performance testing because it tests the effectiveness of your filter in reducing or removing potentially harmful contaminants that pass through. This article explains how to test your water filter and how to use water filter performance testing to optimize your home (and body’s) most precious resource. 

Performance Testing Your Water Filter

There are two main ways to measure your filtered water quality: 

Conduct a Full Performance Test.

  • This method requires you to order two tests, one test of the water before filtration and one test of the water after filtration.
  • A full performance test evaluates the effectiveness of your filter by comparing the contaminant levels before and after filtration. Usually, you hope to see significant reductions of key parameters without any new contaminants emerging in the treated water.
  • This is the best way to assess how well your water filter is working.
  • Conduct a Post-Treatment Test.

  • A post-treatment test analyzes your water only after it travels through your filter.
  • This method evaluates the quality of your filtered water–determining whether the water is safe to drink after filtration.
  • You will see the concentrations of the contaminants in the water you’re drinking, but you won’t see the concentration values pre-filtration.
  • This option only requires one water test and is, therefore, less expensive.
  • The Full Performance Test is the only way to evaluate the filter whereas the Post-Treatment Test will not tell you about the effectiveness of the filter, but whether or not your water is safe to drink. When conducting either test, it is important to send your water samples to an accredited water testing laboratory and to pick a water testing package that makes sense for you. Contact us if you want help picking the best water test for your needs:

     

    Talk to an Expert

     

    Steps to Performance Testing Your Water Filter

    1. Ordering Your Testing Kit 

    Once you have decided which test you would like to conduct, you are ready to order your testing kit(s).  

    Each test measures an array of different contaminants, so you should choose which test will best evaluate your filter’s effectiveness based on the contaminants that it claims to remove.


    2. Preparing to Test 

    If you choose to conduct either a Full Performance or Post-Treatment Test, we advise running the test shortly after installing a fresh filter and/or cleaning your system. This ensures that you’re getting your filter’s best performance data. You can expect the filter’s performance to degrade over time (typically over several months for a busy home).

    If you’re particularly worried about your filter’s performance over time, then collect your water samples after the filter has been in use for several weeks or months. 

    3. Testing Your Water Filter 

    To test your water filter, simply follow the instructions detailed in the testing kit that you have ordered. If you are conducting a Full Performance Test, collect one sample of water before it enters your filter and one sample that has passed through your filter. If you are conducting a Post-Treatment Test, collect your water sample after the water has passed through your filter. 

    Reasons Why Your Filter Isn’t Working After Maintenance

    Your water is encountering contaminants AFTER filtration. 

    • For example, if your water is treated using a point-of-entry unit in your garage and the pipes throughout your house are old and contain lead, then your “treated” water can become recontaminated as it travels through your home’s plumbing. 

    You are not using the right type of filter to remove the desired contaminants.

    • Not all filters are equal. Different treatment technology is suitable for different types of water quality and different contaminants. See here to learn more about water treatment and filter selection. 

    Reasons Why Your Filter Isn’t Working Over Time

    Your filter (or membrane) is broken, ripped, or torn and has sustained extensive wear and tear. 

      • If you collected your sample without first replacing your filter beforehand, then it’s possible a break in your membrane or filters could be making it easy for water (especially under pressure) to choose the path of least resistance–the path untreated! 

      Your water filter is “used up”. 

        • Over time, contaminants may have collected on the surface area of the filter media until all (or most) of that surface area is covered with pollutants. When this happens, the filter must either be replaced or backwashed in order to continue removing contaminants. 

        Your filter has bacteria growing in or on it. 

          • Microbial growth can reduce filter performance by blocking adsorption, creating breakthrough and contaminant conduits or otherwise overwhelming the filter with other burdens.
          Test your water with Tap Score

          Why Trust Tap Score?

          We know how confusing it can be to find advice on water quality and treatment you can trust. That’s part of the reason we made Tap Score—to help improve the way you test and treat your drinking water.

          • No affiliate links: Unlike most sites revolving around water quality, we do not take a cut from sales on filtration systems.
          • Unbiased advice: Our blog is independently researched by our team of water scientists and designed to provide clarity on water quality, not to sell treatment products.
          • Independent laboratory testing: Tap Score test results come from SimpleLab's third-party network of certified laboratories; in other words, accredited labs provide the data without conflicts of interest.
          • Continuously updated: Science never rests. That’s why our content always reflects the latest developments in scientific research and regulatory standards.
          • Always available: Our customer service team is the best in the industry and available anytime via chat to answer all your water quality questions.

           

           

          author portrait
          About The Author

          CEO


          Johnny Pujol, CEO of SimpleLab, is devoted to advancing environmental laboratory logistics, ensuring each stage—from sample collection to results—is clear, easy, and insightful. Holding a Master's in Engineering from UC Berkeley and a Bachelor's in Economics from Boston University, Johnny brings a unique blend of technical expertise and business insight to his role. Outside of SimpleLab, you can find him training for Pentathlons or writing spy fiction.
          back to top