Tips for Taps Blog

Why Is My RO Water Filter Leaking?

Why Is My RO Water Filter Leaking?

 

Do you have a reverse osmosis (RO) water treatment system? Is it not working properly? This is an article to help you determine why your drinking water filter is leaking and what you can do to fix your RO.

If you own and maintain a reverse osmosis water treatment system in your home, then you’re probably already aware that things sometimes go awry. The water quality engineers at SimpleLab have pulled together a helpful list of the most common problems people have with their Reverse Osmosis water filters at home along with the most common solutions.

Reverse Osmosis: Problems, Solutions – A Quick Guide

Scan the headlines below for common symptoms, causes, and solutions to water filter failures. If you have questions about your water quality or your water treatment system, please don’t hesitate to reach out to our professional water testing team.

Scale forming on the membrane?

Cause: Failure of the antiscalant, acid dosing device, or pH monitor

Fix: Check your dosing equipment is working properly and monitor all changes in water quality before and after the RO system. Ask our team for help by emailing: hello@gosimplelab.com or clicking on our help page.

Iron accumulation on the filters and membranes?

(Leading to a high pressure difference and low permeate flow)

Cause: High iron content in raw water, corroding pipes, failure of media filters

Fix: Check pipes and media filters. Ask our team for help by emailing: hello@gosimplelab.com or clicking on our help page.

Bacterial film on filters and membranes?

(Leading to high pressure difference and low permeate flow)

Cause: Ineffective sanitization or biocide

Fix:  Sanitize all filters, perform microbiological analysis, check chemical dosing tanks; heck for biocide adsorption on carbon filters, check contact times and dose rates, select broad-spectrum biocide for organic content. Ask our team for help by emailing: hello@gosimplelab.com or clicking on our help page.

Tap Score Water Testing

 

Organic or humic content on filters and membranes?

Cause: High organic content

Fix: Test the feed water for TOC and color Ask our team for help by emailing: hello@gosimplelab.com or clicking on our help page.

Membrane damage leading to high salts passthrough and high flux?

Cause: Chlorine overdosing

Fix: Perform chlorine tests, check dosing equipment, redox meters, bisulfite levels and the general location of dosing equipment. Ask our team for help by emailing: hello@gosimplelab.com or clicking on our help page.

High Salt Passthrough?

Cause: Failure of the O-ring at the permeate tube

Fix: Check conductivity in each vessel and membrane. Ask our team for help by emailing: hello@gosimplelab.com or clicking on our help page.

Bacteria and colloid fouling of micron-pre filters and membranes

Cause: Breakthrough of your media pre-filter

Fix: Wash your media pre-filters and add some biocide. Ask our team for help by emailing: hello@gosimplelab.com or clicking on our help page.

author portrait
About The Author
John Pujol

CEO


Johnny Pujol, CEO of SimpleLab, is devoted to advancing environmental laboratory logistics, ensuring each stage—from sample collection to results—is clear, easy, and insightful. Holding a Master's in Engineering from UC Berkeley and a Bachelor's in Economics from Boston University, Johnny brings a unique blend of technical expertise and business insight to his role. Outside of SimpleLab, you can find him training for Pentathlons or writing spy fiction.
back to top