Tips for Taps Blog

What is limescale and how do I fix it?

What’s the White Residue on My Fixtures?


Do you see white residue on your faucets, shower heads, and just about any surface your water touches? We’re here to tell you: it’s not harmful to your health, it may be bad news for your appliances, and there are easy fixes.

You’re not alone if you sat down to search for an explanation to the white spots, film, and build-up which seems to be plaguing your glassware, faucets, shower heads, shower glass, and beyond.

This nuisance deposit from drinking water is pervasive across the US (see the map below), but there are ways to get rid of it.

Map of US Water Hardness

USGS Map showing water hardness results from well testing across the US by National Water Quality Association Program in 2014.

What Is this White, Chalky, Spotty Buildup?

The white residue you see on fixtures and glassware is the result of minerals carried through your tap water. Higher amounts of mineral deposits usually signify higher levels of water hardness.

Hardness refers to the total amount of calcium, magnesium, and occasionally other minerals (e.g. silicate) in your drinking water. As water flows through limestone and chalk in the environment, it dissolves the calcium, carbonates, and magnesium that comprise the bulk of water hardness.

In areas with hard water, these minerals precipitate out of your tap water onto surfaces. This is why you find residue most commonly on your faucets, shower heads, pots and pans, and anything that comes out of the dishwasher. You might hear this chalky white substance called “limescale,” or “calcium buildup.”

Is Limescale Bad for My Health?

Water hardness is largely believed to be harmless to human health. In fact, some research suggests that exposure to calcium and magnesium may have protective effects against cardiovascular disease, though evidence is still not definitive.

If water hardness causes any issues, it is usually aesthetic—e.g. taste or staining on clothingor plumbing and appliance-related.

White buildup limescale on shower head

Is Limescale Bad for My Home?

If your water has high water hardness, scale can build up in your pipes, which can cause pressure and pipe integrity problems over time. Not only can this negatively influence the pipes that bring water to your home, but also the smaller pipes attached to appliances like washing machines, dishwashers, water heaters, and even your freezer’s ice maker.

If this is the case, you’ve likely noticed a lot of limescale around your home. Testing your water for hardness can give you a clear indication of whether you need to invest in a treatment solution.

The Best Water Testing Kits of 2024—Tap Score

How Do I Get Rid of Limescale?  

Fortunately, there are some great natural remedies to rid your sinks, showers, and cookware of limescale.

Note: When limescale reacts with soap (think shower and tub), it can form mineral deposits known as "soap scum"—this is white to off-white in color, and you should be able to remove it the way you remove limescale.

Removing Limescale on Sinks and Faucet Heads:

Soak a cloth or towel in vinegar. Wrap it around your tap and let soak for 30-60 minutes depending on how much build up you have. Remove, scrub, and wash with soap and water.

Removing Limescale in Toilet Bowl:

If you have build up in the toilet, a little vinegar and baking soda will go a long way:

  1. Turn off water to toilet and then flush so the water level is low and you can see deposits.
  2. Spray or rub vinegar on deposits and let sit for 30-45 minutes.
  3. Then, scrub deposits with a toilet brush. If this works, turn the water on and end here.
  4. If you still see deposits, add baking soda and scrub.
  5. This should do the trick, but a pumice stone scrub will take off any recalcitrant deposits.

Removing Limescale on Washing Machine:

This method wastes a bit of water, but if your washer is filled with deposits, you may need to run through this routine:

  1. Run a hot cycle (empty) with 1 cup of baking soda.
  2. Clean the inside of the washer with a cloth.
  3. Run a second hot cycle (empty) with 1 cup vinegar.

Removing Limescale from Pots and Pans:

For heavily scaled pots and pans:

  1. Fill pot with a 3:1 ratio of water to vinegar.
  2. Bring to boil, then turn off and let sit until water is warm.
  3. Use warm water with a sponge to scrub off the mineral deposits.
  4. Wash regularly.

Solutions for Hard Water

While all of the above options are helpful to remediate what’s already been done, they do not eliminate water hardness from your water. Sometimes tap water is too hard and will not taste good (usually over 180 PPM or mg/L, measured by calcium carbonate). If you need to reduce water hardness, your options include:

  1. Investing in a water softener that uses salt-based ion exchange technology.
  2. Investing in a water softener that uses non-salt-based technology
  3. Investing in a reverse osmosis treatment system (RO), but you’ll need to maintain your RO system often if your water hardness is high; this can be expensive.

What's the Takeaway?

  • The white residue you see on fixtures and glassware is the result of minerals carried through your tap water and typically called "limescale." Higher amounts of mineral deposits usually signify higher levels of water hardness.
  • Limescale is harmless to human health. But it can build up in your pipes, which can cause pressure and pipe integrity problems over time. This extends to the smaller pipes attached to appliances like washing machines, dishwashers, water heaters, and even your freezer’s ice maker.
  • Vinegar and baking soda are great tactics for removing limescale residue from your fixtures, cookware and glassware, and even laundry machine. But reducing water hardness levels will require investing in a water softener or reverse osmosis treatment system. Test your water to find out how hard your water is. 



Why Trust Tap Score?

We know how confusing it can be to find advice on water quality and treatment you can trust. That’s part of the reason we made Tap Score—to help improve the way you test and treat your drinking water.

  • No affiliate links: Unlike most sites revolving around water quality, we do not take a cut from sales on filtration systems.
  • Unbiased advice: Our blog is independently researched by our team of water scientists and designed to provide clarity on water quality, not to sell treatment products.
  • Independent laboratory testing: Tap Score test results come from SimpleLab's third-party network of certified laboratories; in other words, accredited labs provide the data without conflicts of interest.
  • Continuously updated: Science never rests. That’s why our content always reflects the latest developments in scientific research and regulatory standards.
  • Always available: Our customer service team is the best in the industry and available anytime via chat to answer all your water quality questions.
author portrait
About The Author


Serving as the CCO at SimpleLab, Jorgen has been an integral part of Tap Score since its inception. With a passion for combating misinformation in the water industry, he is dedicated to empowering individuals with a clear understanding of the fundamentals of their drinking water. In his spare time, Jorgen enjoys creating immersive social experiences for Virtual Reality with his wife.
back to top